NISformance 350z


This is our most recent project, A 2003 Nissan 350z. It has a 2011 Maxima engine in it with JWT C8/RZ cams, LS hiram intake manifold,PPE headers and a 3.5" exhaust. After reaching our goal of going 10s with our Maxima drag car, we wanted to repeat those same results but in a RWD car.

Having community support is important to us. It has allowed our business to grow and given us the ability to accomplish these goals. With this car we want to give those who are interested in what we are doing a chance to become more actively involved with the building process.

We have set up different sponsorship levels, with different benefits for each one. Along with this, we will have a list of parts and future plans for the car. All sponsors will be listed on our sponsorship list. Please click on the link below to learn more. For questions or concerns regarding sponsorship, please email us at [email protected]



SPONSORS:
Silver level sponsors:

  • Donald Woodcock from MD
Bronze level sponsors:
  • Carter McLaughlin from GA
  • Rich "SER" Ramphal from FL

08/05/2022 - (10.84@128)
Back in the 10's!!!

Another huge milestone set by NISformance! This is THE FIRST and only 350Z /RWD all motor VQ in the 10s!!! . After we ran 10s with the maxima back in 2019 we wanted to set out and do the same thing in a rwd vq!!
Not only did we get in the 10s, we ran a 10.84 at 128mph !!! IN the SUMMER HEAT!! With 2000 DA!!
In addition to this, we also did a 1.44 60ft. Which is another record in it of itself as its the fastest 60ft of any VQ 350Z/370Z!!!! (YES even faster than some of the 1000 hp+ turbo cars!)
We are very proud to be the all motor VQ KINGS!. This is not just something that's said but literally proven on the track by us!
(no one else is even close)
HUGE THANKS TO everyone involved!!!

Track Information:
60ft- 1.44
1/8 ET- 6.97
1/8 MPH- 98.81
1/4 ET- 10.84
1/4 MPH- 128.39

Vehicle information:
2003 350z
2011 Maxima engine with JWT C8/RZ cams
NISformance 3.5” intake
PPE Headers
ISR y-pipe
BC Racing coilovers
ISR suspension arms (rear)
NISformance 3.5” exhaust
VP Racing "M5" Methanol race gas (blend)



04/01/2022 - (11.54@119)


This was our first time on track with the Z. Our main objective on this trip was to shake the car down. We wanted to get some seat time in the car to see what improvements needed to be made. It was quite apparent during this trip that the car needed major suspension upgrades. During this trip we had stock suspension.

Track information:
1/4 ET- 11.54
1/4 MPH- 119

Vehicle information:
  • 2003 350z
  • 2011 Maxima engine with JWT C8/RZ cams
  • NISformance 3.5” intake
  • PPE Headers
  • ISR y-pipe
  • NISformance 3.5” exhaust
  • VP Racing "M5" Methanol race gas